Materials

All rails, posts and pickets shall be formed from 6063-T5 extruded aluminum alloys. All railing accessories shall be cast from ANSI 713 alloy. All exposed fasteners used in the system shall be aluminum or stainless steel.

Scope of Work

Superior Series 600 Railing shall be manufactured and supplied by Superior Aluminum Products, Inc., 555 E. Main St., Russia, Ohio 45363

Series 600 Railing meets federal safety requirements as determined by an independent testing laboratory. Test results available upon request. Reg. Patent No. 3174727.

The railing system shall consist of 1-1/2" square posts that can be either base mounted or embedded into concrete. The top rail shall be a minimum of 1-1/2" wide and the bottom rail a minimum of 1-3/8" wide. Pickets shall be 1/2" square on approximately 6", 4", or 3" centers, and shall run between the top and bottom rail. The rail shall be continuous in lengths up to 16'. The railing system will adapt to step railing requirements by specifying a rectangular hole in bottom rail.